Описание

Информация для заказа
Описание типа продуктаSE-P40-2500
Артикул101172154
EAN-код4030661300177
ECl@ss27-27-34-01
Утверждение
TUV UL
Глобальные свойства
Наименование товараGummiprofil SE-P40
СтандартыEN ISO 13850
Соответствие Директивам (Да/Нет)Yes
Материал резинового профиля EPDM, 65 Shore A
Международная аббревиатураEPDM, 65 Shore A
Химическое названиеEthylene-propylene terpolymer
Упругость при 20 ° CGood
Сопротивление остаточной деформацииGood
Общая устойчивость к атмосферным условиямExcellent
Устойчивость к воздействию озонаExcellent
Устойчивость к воздействию маслаLow
Устойчивость к воздействию топливаLow
Устойчивость к воздействию растворителейLow to satisfactory
Общая устойчивость к воздействию кислотGood
Вес855
Профиль с покрытием (Да/Нет)No
Механические параметры
Механический срок службы20.000.000 operations
Максимальная постоянная нагрузка500 N on the operational switching zone
Перемещение реагированияMax. 9 mm
Дополнительный ходMax. 18 mm
Условия окружающей среды
Минимальная термостойкость?50 °C short duration ?30 °C long duration
Максимальная термостойкость+170 °C short duration +140 °C long duration
Класс защитыIP67
ПримечаниеThe protection class IP 67 applies to the entire signal transmitter.
Размеры
Ширина25 мм
ВысотаApprox. 40 mm
Длина2500 mm
Примечание
If a higher resistance is required, choose safety edge profiles with 20 µm plastic coating. The coating must be submitted to low mechanical loads only.
In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken.
''